Product in category: Exhaust System - Turbo Blanket and Wrap
- Stock: In Stock
- Reward Points: 2
- Model: TK-WR110
- Weight: 0.30kg
Available Options
You are buying on 100% Brand New of:
TANSKY -Aluminized Metallic Heat Shield Sleeve Insulated Wire Hose Cover Loom (L:3FT & 6FT , ID: 0.75"& 1"& 1.25") TK-WR110
Heat Shroud is made from a high
temperature rated glass fiber fabric with an aluminized outer facing.
Same as Heat Sheath but with the added convenience of hook & loop
closure design along the open edges. Without the need of removing one
end of connected wires, cables and hoses, simply wrap Heat Shroud around
whatever needs protection and close edges.
Convenient hook & loop designed edges
Withstands 500°F direct continuous/2000°F radiant heat
No need to remove wires and hoses
Easily trimed to length
We Have Different Size:
TK-WR110M34-3 ( (0.75"=3/4")diameters x 3 foot length)
TK-WR110M31 (1"diameters x 3 foot length)
TK-WR110M314-1 ((1.25"=1-1/4")diameters x 3 foot length)
TK-WR110M64-3 ((0.75"=3/4")diameters x 6 foot length)
TK-WR110M61 ( 1"diameters x 6 foot length)
TK-WR110M614-1 ((1.25"=1-1/4")diameters x 6 foot length)
Available
in multiple lengths and diameters to fit: wiring, fuel lines, brake
lines, intake tubes, pipes, spark plug wires, battery cables, A/C hoses,
and more.
Rated for Moderate Heat:
Not recommended for use on or
against headers, exhaust pipes or extremely hot surfaces (The melting
point of the Velcro fastener is about 325Fº) Can be used in about 90%
of the underhood area when installed.
For best results seal the
sleeves at each end with adhesive foil tape, shrink tube or stainless
steel cable ties. Sleeves are conductive always insulate electric
terminals that it might come in contact with sleeves. To ensure a proper
fit, allow extra room for bends (for example: a 90º bend in a 3/4"
tube will NOT fit in 3/4" I.D. Sleeve, In this case you would need 1"
I.D. or higher)
ALL items are Brand New unless stated otherwise on the listing. We sell DIY (Do It Yourself) Items with a few exceptions. We take no responsibility in teaching you how to install. Professional installation is strongly recommended.